Phone: 301.874.5885 Email USTS
Services Tower Construction
Services
Tower Repair and
Maintenance
Portfolio GalleryHF Antenna-Tower
Installation and
Towers Removal
Public Safety and
Transportation
Operations Center
Communications &
Telemetry Support
Tower Construction
Communications
Self-support Tower Restructure
HF Radio Multiple
Tower Arrays
FM Shark Cage
Antenna Installation
High-Intensity Dual
Lighting Installation
All Categories > Portfolio Gallery > HF Antenna-Tower Installation and Towers Removal 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Information

HF Antenna-Tower Installation and Towers Removal



Setting Antenna-3

larger image
This project consisted of the removal of four guyed towers and the installation of a new, eighty foot tall, self-supporting tower and a new RLPA with a rotator and mast. After conducting calculations, gas-powered metal saws and telescopic all-terrain fork lift were used to remove the four guyed towers. The decommissioned towers, between 60 and 80 feet in height, were cut and removed from the site, and the old foundation was removed by a local excavating company.

Next, the new antenna, tower, and transmissions lines were delivered to the site via contractors and rental equipment. A local contractor also prepared the new foundation for the new RLPA tower, while the rebar cage was delivered and constructed by a local supplier. The antenna was assembled on the ground, while the tower sections were assembled with a forklift. Next, the tower, rotator, mast and antenna were erected with a 70 ton crane, and the transmission and power lines were trenched in conduit from tower to the existing communications room. The transmission lines were pulled by hand.

The excavation, rebar and concrete were inspected and tested by a geotechnical engineering company. The transmission line and antenna were pressure tested. The entire system was tested to ensure it met the manufacturer’s standards, requirements, and specifications. From start to finish, the project took four weeks.





Specifications

Capabilities Applied/Processes

  • Antenna and tower installations were orchestrated in a safe and efficient manner.
  • Tower removals were calculated and controlled.
  • Equipment Used to Remove/Install Towers-Antennas

  • 70 ton crane (install)
  • Telescopic all-terrain forklift (removals/install)
  • Trencher (install)
  • Gas powered metal saws (removals)
  • Overall Tower Size

    103’

    Construction Methods

  • Rebar cage - delivered and constructed by a local supplier.
  • Tower sections - assembled with a forklift.
  • Anchor bolts- leveled and set on a wooden frame.
  • Antenna – assembled on ground
  • Concrete – delivered and poured continuously start to finish
  • Decommissioned towers (60’-80’) - cut, dropped and removed from site.
  • Foundation for new RLP tower - drilled by a local contractor (9’dia. - 20’depth).
  • Old foundations - removed by a local excavating company.
  • Tower/rotor/mast/antenna – erected with 70 ton crane
  • Transmission and power lines – trenched in conduit from tower to existing conduit system.
  • Transmission lines – pulled by hand
  • Logistics

  • Antenna, tower, and transmission lines – delivered to the site
  • Contractors and rental equipment – contracted before start of project
  • Materials Worked With

    Concrete, structural steel

    In process Inspections performed

  • Excavation, rebar and concrete – tested and inspected by local Geotech Company
  • System – tested to manufacturer specifications
  • Transmission line and antenna – pressure tested
  • Industry for Use

    Government

    Installation Location

    Texas

    Standards Met

    All components were installed to manufacturer specifications as well as any standards or requirements of the facility.

    Completion Time

    4 weeks

    Tower Type

    Self support


     MORE IMAGES 

    · Finished System

    · Assembled Antenna

    · Setting Antenna

    · Finished Foundation

    · Tower Base

    · First Tower Section

    · Setting Mast

    · Installing Feed Line

    · Setting Antenna-2

    · Setting Antenna-3


    Request Information
    United States Tower Services, LTD. | Global Communications Infrastructure